Busbar Patch Kits
- High dielectric strength
- Applied as a liquid at room temperature
- Color-matches the epoxy coating powder used
|
Adhesive Alternative to Brazing
- Very high adhesion to stainless steel and other metals
- Balanced flow to get between joints yet not flow off them
- CTE-matched to the substrates involved
|
Resistors, Capacitors, Varistors and Passive Electronics
- Epoxy coating for passive components including resistors, varistors and capacitor
- High temperature stable and excellent thermal cycling materials for ceramic capacitors
- Fast-cure and low-temperature pickup materials for film-wrap capacitors
|
Toroids, Magnetic and Powder Cores
- Low moisture absorbing materials for stable inductance values
- UL-listed products
- Spray coatable and electrolytic sprayable coating powders
|
Epoxy Binder Resin for Pot Cores
- Excellent green strength to move parts before curing
- Optimized particle size for optimum compression between ferrite alloy and epoxy resin
- Low shrinkage to provide minimal magnetic interference
|
Aluminum Housed Resistors
- Maximizes pulse handling capability
- The aluminum housing provides for superior heat conduction
- Resistance to very tough environmental conditions.
|
Automotive Sensors & Stators
- Parts are often made of copper and nylon
- Requires >1000 thermal cycles from -40°C to 195°C
- Are regularly in contact with typical automotive fluids
|
Solenoid Valves
- Strong and tough with excellent thermal cycle / thermal shock performance
- Excellent high temperature stability
- Excellent color stability at operating temperatures
|
High Current Thermal Fuse
- Strength after Thermally conductive > 2.7W/mK
- Tg must be higher than 135°C
- CTE must be less than 20 ppm
|
Large Bushing and High Voltage Applications
- Epoxy Molding Compounds must have good high temperature stability
- They must maintains color stability at high operating temperatures
- SolEpoxy materials are proven compounds and have been used to make millions of bushings, and in some cases, requiring up to 5 kgs of material for a single mold shot
|
Surface Mount Capacitors
- Fast cure for high throughput
- New materials are developed without halogens
- CTE should be between 20-22ppm
|
Data transmission sensor
- High adhesion to NiPdAu and Ag lead frames
- High transmission of wavelengths between 400-1050nm
- Low moisture absorption for high MSL performance
|
LED SMT Liquid
- High-productivity molding compound capable of transfer molding
- High glass transition temperature, able to withstand solder reflow temperatures
- Low moisture absorption – alleviates pressure-induced stresses
|
Fiber Optic Products
- High adhesion to NiPdAu and Ag lead frames
- High transmission of wavelengths between 400-1050nm
- Low moisture absorption for high MSL performance
|
General Lighting Applications
- SolEpoxy holds two patents on phosphor-mixing clear mold compound
- Mix phosphor for color-binning
- SolEpoxy can handle proprietary phosphors
|
|
|
