Product Development
For Electric Vehicle Motor Insulation, DK7-20H is the Productive Choice  Posted On 02/08/2024
Class H epoxy coating powder with a thermal index of 186°C in a motor and winding system. This high temperature durability increases motor life and decreases the risk of motor failure. DK7-20H is broadly adopted for high-torque, compact motors, in automotive, aeronautic and aerospace applications.
Alternative coatings replace discontinued epoxy motor and winding insulation  Posted On 1/30/2024
SolEpoxy ™DK7-1060 completes our portfolio of offsets to 3Ms discontinued the coating powders, and joins the broadest line-up of UL-listed coating powders for electrical insulation.
Flexible Epoxy Insulation for Electric Vehicles and Transformers  Posted On Dec. 2023
Insulate thin, flexible, oddly shaped busbar for the demanding automotive duty cycle.
  • Flexible when cured
  • Extremely high dielectric strength
  • Applied electrostatically to a cold substrate and oven cured
  • Thermal durability, withstanding greater than 1,000 hours at 200°C
DK15-0907 ORANGE is the new standard for insulating electric vehicles  Posted On Sept 30, 2021
Our most popular busbar powder is now offered in RAL2003/Pantone 164. Using DK15-0907 offers:
  • High productivity application process
  • Low weight, compact design
  • Durable and dependable from assembly to end of vehicle life
Fast Cooling Busbar Insulation  Posted On May 24, 2021
Uninsulated busbars were thought to cool off faster than insulated. However, busbars coated with epoxy coating powders cool off faster than:
  • Bustube
  • Mylar
  • Bare bar when applied thin
Epoxy Molding Compound with Very Low Coefficient of Thermal Expansion (CTE)  Posted On Jan 14, 2021
MG30 offers unique features:
  • CTE of 8ppm/°C
  • Incredible chemical resistance
  • High temperature operation
MCL-IM20: Injection molding equipment cleaning material  Posted On 06/27/2019
SolEpoxy™ MCL-IM20 cleaning material is a non-reacting, epoxy-based material suitable for purging injection barrels, screws, and nozzles of injection molding equipment.
Light Filtering Epoxy for Surface Mount Sensors  Posted On 09/14/2017
Optical sensors are used for a wide variety of consumer, automotive and industrial applications, such as smart phones, tablets, TVs, laptop computers, self-driving cars, health monitors, and bar code scanners.
SolEpoxy OP 1000 is the Standard for non-Yellowing Epoxy 
When designing a lighting environment, it’s important to know that the color will not change over time. When replacing an old lamp with a new one, it should not be obvious which unit was replaced.
SolEpoxy announces participation in the Polimotor 2 project to build an all-plastic engine block with a material as strong as steel yet as light as plastic. 
November 2016 – SolEpoxy, a leading global supplier of high-performance epoxy composites, announced today that a variation of its MH7-1 epoxy molding compound will be used as the engine block and oil pan in the second generation all-plastic engine project.
OL88-8 is the perfect clear encapsulant for outdoor RGB displays 

Beautiful and tough, LED billboards are a marvel of manufacturing skill. Similar to consumer devices like smartphones and flat-screen TV’s, outdoor LED displays have gone high-def (HDTV). But unlike consumer devices, these displays need to be rugged – they live outside, afterall!

Epoxy with light filter technology to replace traditional but expensive bandpass filters 
Optical Filters are used to transmit a preselected-portion of the light spectrum while rejecting all other wavelengths. So why would you want to do that? There are a many applications that use this technology including proximity and gesture sensors, data transmitters, feedback lasers and optical instruments.
Clear Epoxy-Hybrid Liquid – An Alternative to Silicone 
Epoxy can be a great alternative to silicone in lighting applications but up until now, most designers preferred silicone for its anti-yellowing durability.

SolEpoxy has developed OL10-1 which is a clear, epoxy-hybrid featuring the best anti-yellowing chemistry of any liquid epoxy on the market today. Testing by SolEpoxy and our lead users proves that OL10-1 is the clear encapsulant of choice for LED junction temperatures (Tj) up to 105°C.
SolEpoxy OL-Series: Rapid-prototyping; Easy scale-up.  Posted On 08/10/2016
SolEpoxy OL10-1 offers rapid prototyping by:
  • Testing out various configurations in liquid form
  • Prototyping with a liquid with the same optical properties as a clear mold compound for low-volume production
  • Scale up with a clear mold compound that has superior resistance to yellowing.
Class H Powder for motor iron  Posted On June 14, 2016
  • Improves Reliability: Class H insulation powder insures improved reliability with higher temperatures.
  • Extends the motor lifetime.
  • Reduce costs: Class H insulation powder reduces life cycle costs by being a energy resource conservation.
Clear Gray Encapsulation for High-Contrast RGB Displays  Posted On March 14th, 2016
A gray epoxy mold compound is in development for Outdoor RGB displays that:
  • Is as dark as possible for higher contrast of black-body PLCCs
  • Stays dark even after temperature exposure
  • Has excellent adhesion to PCB to meet MSL 2/2a target
Advantages of Epoxy Coating Powder over Mylar Sleeves  Posted On March 7th, 2016
Low & medium voltage busbars can be electrical insulated using either mylar sleeves or epoxy coating powder. Epoxy coating powder provides the following benefits over mylar:
  • It costs less than plastic per linear foot/meter
  • Epoxy has higher operating temperature
  • Epoxy can be used on Odd Shaped Parts
DK15-0907 is the only powder you need for low and medium voltage busbars  Posted On March 3rd, 2016
No more need to mess with multiple epoxy coating powders for both your low power and mid power busbar coating jobs.
  • One powder can be used for 600V and 38kV busbars
  • Works equally well on aluminum and copper busbars
  • Smooth finish with no sagging - especially important for medium voltage
LED SMT Liquid  Posted On September 14, 2015
  • High-productivity molding compound capable of transfer molding
  • High glass transition temperature, able to withstand solder reflow temperatures
  • Low moisture absorption – alleviates pressure-induced stresses
Super white epoxy molding compound ready to sample 
High reflectivity, non-yellowing epoxy mold compound
  • Initial reflectivity greater than 92%
  • Maintains reflectivity after 1,000 hours @ 125°C
  • Cost-effective alternative to silicone