About Us 
Describe SolEpoxy
AL10-1 One-part epoxy solution to stainless steel brazing 

Key Application Considerations:

  • Very high adhesion to stainless steel and other metals
  • Balanced flow to get between joints yet not flow off
    them
  • CTE-matched to the substrates involved
MH20-01 Black Very tough, high operating temperature epoxy mold compound for power resistors, switches, fuses, actuators, and explosion proof housings 
MH20-01 is a very tough epoxy mold compound with excellent high temperature resistance. It is used in applications that use thermoset plastics instead of thermoplastics because of the high temperature requirements
MH20-01 Gold Very tough, high operating temperature epoxy mold compound for power resistors, switches, fuses, actuators, and explosion proof housings 
MH20-01 is a very tough epoxy mold compound with excellent high temperature resistance. It is used in applications that use thermoset plastics instead of thermoplastics because of the high temperature requirements.
MH20-0686 Black Epoxy Molding Compound 
MH20-0686 is a very tough epoxy mold compound with excellent high temperature resistance. It is used in applications that use thermoset plastics instead of thermoplastics because of the high temperature requirements.
MG33-0690 Black Epoxy Mold Compound 
MG33-0690 Fast cure, solvent resistant compound with superior copper adhesion for engine gear tooth and other automotive sensors
Busbar Patch Kits 
  • High dielectric strength
  • Applied as a liquid at room temperature
  • Color-matches the epoxy coating powder used
Adhesive Alternative to Brazing 
  • Very high adhesion to stainless steel and other metals
  • Balanced flow to get between joints yet not flow off them
  • CTE-matched to the substrates involved
MH20-0686 Black Epoxy Molding Compound 
MH20-0686 is a very tough epoxy mold compound with excellent high temperature resistance. It is used in applications that use thermoset plastics instead of thermoplastics because of the high temperature requirements.
MG33-0690 Black Epoxy Mold Compound 
MG33-0690 Fast cure, solvent resistant compound with superior copper adhesion for engine gear tooth and other automotive sensors
Certifications 
List different Certifications
OC10-1 Heat-resistant, optically-clear molding compound for RBG devices & BLU 
  • Resists yellowing up to 125°C for thousands of hours
  • Refractive index of 1.53 @ 400 nm
  • Excellent transmittance from 400 to 1400 nm
OL10-1 High refractive index liquid encapsulant for optoelectronic devices 
  • Outstanding resistance to yellowing after heat aging up to 105°C
  • Suitable for through-hole, SMT, and MAP style packages
  • Can be used to replace expensive bandpass filters
OP1000 Heat and UV-resistant, optically clear molding compound for RBG devices and backlighting 
  • Resists yellowing up to 125°C for thousands of hours
  • Glass transition temperature (Tg) > 135°C
  • Diffused, colored and light filtering versions
OP7000 Clear molding compound for SMT light sensors and emitters 
  • Single-Mold Data Transmission Sensors
  • Excellent light transmission even after aging
  • Excellent MSL performance for single-mold devices
OP7200 Clear molding compound for MAP light sensors and emitters 
  • Optimized for leadframe & laminate-based MAP style packages
  • Excellent transmittance from 400 to 1600 nm
  • Excellent resistance to yellowing after heat aging
SMT Backlighting Units (BLU) 
Backlighting units are all around us today. Not a single smartphone or tablet could ship without them and they are the lighting methods used by all LED televisions.

SolEpoxy has developed a range of optically clear liquids that are best in class in yellow-resistance. These materials can withstand 1000's of hours @ 105°C without little degradation.
OG10-1 Heat and UV-resistant, optically-clear molding compound for RBG devices and backlighting 
OG10-1 is a non-yellowing clear molding compound for the encapsulation of optoelectronic devices. It features high transmittance from under 400nm to 1600nm, high refractive index and cures to form a hard, non-tacky encapsulant with low gas permeability. It may be used as a cost-effective silicone alternative with similar light output for LEDs.
OP1000 Heat and UV-resistant, optically clear molding compound for RBG devices and backlighting 
  • Resists yellowing up to 125°C for thousands of hours
  • Glass transition temperature (Tg) > 135°C
  • Diffused, colored and light filtering versions
Flight Pack Pricing 
Latest Prices as of May 3, 2022
OC10-1 Heat-resistant, optically-clear molding compound for RBG devices & BLU 
  • Resists yellowing up to 125°C for thousands of hours
  • Refractive index of 1.53 @ 400 nm
  • Excellent transmittance from 400 to 1400 nm
OL10-1 High refractive index liquid encapsulant for optoelectronic devices 
  • Outstanding resistance to yellowing after heat aging up to 105°C
  • Suitable for through-hole, SMT, and MAP style packages
  • Can be used to replace expensive bandpass filters
OP1000 Heat and UV-resistant, optically clear molding compound for RBG devices and backlighting 
  • Resists yellowing up to 125°C for thousands of hours
  • Glass transition temperature (Tg) > 135°C
  • Diffused, colored and light filtering versions
HB2000 White reflective molding compound for LEDs 
HB2000 is a high temperature epoxy molding compound developed as an alternative to thermoplastics for LEDs rated at ~1 watt or more. It is designed for molded lead frame reflector packages in LED backlighting units (BLU) for liquid crystal displays and for general lighting applications.
MH7-1 
MH7-1 is a very tough, high-operating-temperature epoxy mold compound for harsh environment applications.
MH20-2000 Very tough, high operating temperature epoxy mold compound for power resistors, switches, fuses, actuators, and explosion proof housings 
MH20-2000 is a very tough epoxy mold
compound with excellent high temperature resistance.
It is used in applications that require thermoset
epoxies instead of thermoplastics because of higher
performance requirements.
MG6-0330 Tough, high thermal shock epoxy mold compound for large bushings and other high voltage applications 
MG6-0330 is very tough epoxy mold compound with excellent thermal shock and thermal cycle resistance.
OL10-1 High refractive index liquid encapsulant for optoelectronic devices 
  • Outstanding resistance to yellowing after heat aging up to 105°C
  • Suitable for through-hole, SMT, and MAP style packages
  • Can be used to replace expensive bandpass filters
OP1000 Heat and UV-resistant, optically clear molding compound for RBG devices and backlighting 
  • Resists yellowing up to 125°C for thousands of hours
  • Glass transition temperature (Tg) > 135°C
  • Diffused, colored and light filtering versions
OL88-8 High refractive index liquid encapsulant for optoelectronic devices 
OL88-8 is an ultra-clear hybrid liquid encapsulant developed specifically for outdoor RGB displays. It is uniquely suited for RGB SMT devices due to its very high adhesion to black-faced PPA packages and very low moisture absorption, able to pass -65°C to 150°C temperature shock cycles and 85°C / 85% RH + 3x 260°C reflow required for outdoor RGB SMT displays.
OP1000 Heat and UV-resistant, optically clear molding compound for RBG devices and backlighting 
  • Resists yellowing up to 125°C for thousands of hours
  • Glass transition temperature (Tg) > 135°C
  • Diffused, colored and light filtering versions
For Electric Vehicle Motor Insulation, DK7-20H is the Productive Choice 
Class H epoxy coating powder with a thermal index of 186°C in a motor and winding system. This high temperature durability increases motor life and decreases the risk of motor failure. DK7-20H is broadly adopted for high-torque, compact motors, in automotive, aeronautic and aerospace applications.
Alternative coatings replace discontinued epoxy motor and winding insulation 
SolEpoxy ™DK7-1060 completes our portfolio of offsets to 3Ms discontinued the coating powders, and joins the broadest line-up of UL-listed coating powders for electrical insulation.
Flexible Epoxy Insulation for Electric Vehicles and Transformers 
Insulate thin, flexible, oddly shaped busbar for the demanding automotive duty cycle.
  • Flexible when cured
  • Extremely high dielectric strength
  • Applied electrostatically to a cold substrate and oven cured
  • Thermal durability, withstanding greater than 1,000 hours at 200°C
DK15-0907 ORANGE is the new standard for insulating electric vehicles 
Our most popular busbar powder is now offered in RAL2003/Pantone 164. Using DK15-0907 offers:
  • High productivity application process
  • Low weight, compact design
  • Durable and dependable from assembly to end of vehicle life
Fast Cooling Busbar Insulation 
Uninsulated busbars were thought to cool off faster than insulated. However, busbars coated with epoxy coating powders cool off faster than:
  • Bustube
  • Mylar
  • Bare bar when applied thin
Epoxy Molding Compound with Very Low Coefficient of Thermal Expansion (CTE) 
MG30 offers unique features:
  • CTE of 8ppm/°C
  • Incredible chemical resistance
  • High temperature operation
MCL-IM20: Injection molding equipment cleaning material 
SolEpoxy™ MCL-IM20 cleaning material is a non-reacting, epoxy-based material suitable for purging injection barrels, screws, and nozzles of injection molding equipment.
Light Filtering Epoxy for Surface Mount Sensors 
Optical sensors are used for a wide variety of consumer, automotive and industrial applications, such as smart phones, tablets, TVs, laptop computers, self-driving cars, health monitors, and bar code scanners.
SolEpoxy OP 1000 is the Standard for non-Yellowing Epoxy 
When designing a lighting environment, it’s important to know that the color will not change over time. When replacing an old lamp with a new one, it should not be obvious which unit was replaced.
SolEpoxy announces participation in the Polimotor 2 project to build an all-plastic engine block with a material as strong as steel yet as light as plastic. 
November 2016 – SolEpoxy, a leading global supplier of high-performance epoxy composites, announced today that a variation of its MH7-1 epoxy molding compound will be used as the engine block and oil pan in the second generation all-plastic engine project.
OL88-8 is the perfect clear encapsulant for outdoor RGB displays 

Beautiful and tough, LED billboards are a marvel of manufacturing skill. Similar to consumer devices like smartphones and flat-screen TV’s, outdoor LED displays have gone high-def (HDTV). But unlike consumer devices, these displays need to be rugged – they live outside, afterall!

Epoxy with light filter technology to replace traditional but expensive bandpass filters 
Optical Filters are used to transmit a preselected-portion of the light spectrum while rejecting all other wavelengths. So why would you want to do that? There are a many applications that use this technology including proximity and gesture sensors, data transmitters, feedback lasers and optical instruments.
Clear Epoxy-Hybrid Liquid – An Alternative to Silicone 
Epoxy can be a great alternative to silicone in lighting applications but up until now, most designers preferred silicone for its anti-yellowing durability.

SolEpoxy has developed OL10-1 which is a clear, epoxy-hybrid featuring the best anti-yellowing chemistry of any liquid epoxy on the market today. Testing by SolEpoxy and our lead users proves that OL10-1 is the clear encapsulant of choice for LED junction temperatures (Tj) up to 105°C.
SolEpoxy OL-Series: Rapid-prototyping; Easy scale-up. 
SolEpoxy OL10-1 offers rapid prototyping by:
  • Testing out various configurations in liquid form
  • Prototyping with a liquid with the same optical properties as a clear mold compound for low-volume production
  • Scale up with a clear mold compound that has superior resistance to yellowing.
Class H Powder for motor iron 
  • Improves Reliability: Class H insulation powder insures improved reliability with higher temperatures.
  • Extends the motor lifetime.
  • Reduce costs: Class H insulation powder reduces life cycle costs by being a energy resource conservation.
DK15-0907 is the only powder you need for low and medium voltage busbars 
No more need to mess with multiple epoxy coating powders for both your low power and mid power busbar coating jobs.
  • One powder can be used for 600V and 38kV busbars
  • Works equally well on aluminum and copper busbars
  • Smooth finish with no sagging - especially important for medium voltage
Advantages of Epoxy Coating Powder over Mylar Sleeves 
Low & medium voltage busbars can be electrical insulated using either mylar sleeves or epoxy coating powder. Epoxy coating powder provides the following benefits over mylar:
  • It costs less than plastic per linear foot/meter
  • Epoxy has higher operating temperature
  • Epoxy can be used on Odd Shaped Parts
Clear Gray Encapsulation for High-Contrast RGB Displays 
A gray epoxy mold compound is in development for Outdoor RGB displays that:
  • Is as dark as possible for higher contrast of black-body PLCCs
  • Stays dark even after temperature exposure
  • Has excellent adhesion to PCB to meet MSL 2/2a target
Super white epoxy molding compound ready to sample 
High reflectivity, non-yellowing epoxy mold compound
  • Initial reflectivity greater than 92%
  • Maintains reflectivity after 1,000 hours @ 125°C
  • Cost-effective alternative to silicone
LED SMT Liquid 
  • High-productivity molding compound capable of transfer molding
  • High glass transition temperature, able to withstand solder reflow temperatures
  • Low moisture absorption – alleviates pressure-induced stresses
Toroids, Magnetic and Powder Cores 
  • Low moisture absorbing materials for stable inductance values
  • UL-listed products
  • Spray coatable and electrolytic sprayable coating powders
Analytical Laboratory 
The Analytical Laboratory supports the Product Development Laboratories and assists with the resolution of customer problem solving issues.We do Product Development Support,Support of Customer Issues, Product Testing and Raw Material Testing.
OL10-1 High refractive index liquid encapsulant for optoelectronic devices 
  • Outstanding resistance to yellowing after heat aging up to 105°C
  • Suitable for through-hole, SMT, and MAP style packages
  • Can be used to replace expensive bandpass filters
OP1000 Heat and UV-resistant, optically clear molding compound for RBG devices and backlighting 
  • Resists yellowing up to 125°C for thousands of hours
  • Glass transition temperature (Tg) > 135°C
  • Diffused, colored and light filtering versions
MH6-0504 Very tough, high thermal shock epoxy mold compound for solenoids, coil bobbins, and transformers 
MH6-0504 is very tough epoxy mold compound with excellent thermal shock and thermal cycle resistance.
MG33F-0520 Fast Cure, solvent resistant epoxy mold compound for tantalum capacitors and reed relays 
MG33F-0520 is a fast cure, solvent resistant epoxy mold compound with excellent adhesion to copper substrates, used on high temperature applications requiring low stress and high thermal conductivity.
Flexible Epoxy Insulation for Electric Vehicles and Transformers 
Insulate thin, flexible, oddly shaped busbar for the demanding automotive duty cycle.
  • Flexible when cured
  • Extremely high dielectric strength
  • Applied electrostatically to a cold substrate and oven cured
  • Thermal durability, withstanding greater than 1,000 hours at 200°C
DK15-0907 ORANGE is the new standard for insulating electric vehicles 
Our most popular busbar powder is now offered in RAL2003/Pantone 164. Using DK15-0907 offers:
  • High productivity application process
  • Low weight, compact design
  • Durable and dependable from assembly to end of vehicle life
Fast Cooling Busbar Insulation 
Uninsulated busbars were thought to cool off faster than insulated. However, busbars coated with epoxy coating powders cool off faster than:
  • Bustube
  • Mylar
  • Bare bar when applied thin
DK7-20H and DK15EG-05: Best affordability and productivity 
The auto industry is hyper-competitive, pushing their factories for maximum productivity while pushing their suppliers for lower prices. SolEpoxy rose to this challenge with two of the world's most productive and affordable motor armature coating powders.
SolEpoxy coating powder technology 
SolEpoxy produces a range of fusion bonded epoxy powder coatings that provide environmental protection and electrical insulation in many power electrical applications.
Advantages of Epoxy Coating Powder over Mylar Sleeves 
Low & medium voltage busbars can be electrical insulated using either mylar sleeves or epoxy coating powder. Epoxy coating powder provides the following benefits over mylar:
  • It costs less than plastic per linear foot/meter
  • Epoxy has higher operating temperature
  • Epoxy can be used on Odd Shaped Parts
Epoxy Molding Compound with Very Low Coefficient of Thermal Expansion (CTE) 
MG30 offers unique features:
  • CTE of 8ppm/°C
  • Incredible chemical resistance
  • High temperature operation
SolEpoxy presents MH20-01 for Injection molding applications up to 220°C 
Injection molding applications require a mold compound with low viscosity, long spiral flow, fast cure time and high hot hardness.
MH20-2000: Strong like steel, light as plastic 
Why use steel when you can use a thermoset epoxy that is as strong as steel, but light as plastic.

SolEpoxy presents MH20-2000, a very tough epoxy mold compound that has nearly the same strength as steel, but with lighter weight.
MH6-0510 Very tough, high thermal shock epoxy mold compound for solenoids, coil bobbins, and transformers 
MH6-0510 is very tough epoxy mold
compound with excellent thermal shock and themal
cycle resistance.
SolEpoxy To Exhibit at DistribuTECH 
600 exhibitors will showcase the latest in transmission and distribution at the Orange County Convention Center in Orlando, Florida
DK15-0907 ORANGE is the new standard for insulating electric vehicles 
Our most popular busbar powder is now offered in RAL2003/Pantone 164. Using DK15-0907 offers:
  • High productivity application process
  • Low weight, compact design
  • Durable and dependable from assembly to end of vehicle life
SolEpoxy launches line of Optically Clear Encapsulants 
SolEpoxy's unique chemistry offers customers:
  • Cost-effective alternative to silicone
  • Optically clear liquids and mold compounds
  • High refractive index materials
Epoxy Insulating Coating Powders 
  • Outstanding chemical resistance, including motor oil, fuel, etc.
  • Low coating thickness required to achieve maximum performance
  • Capability to provide a range of thermal conductivity
Durable Dielectric Molding Compounds 
  • Excellent Electrical Insulation
  • High Strength
  • Excellent thermal shock resistance
Optically Clear Encapsulants 
  • Excellent color stability and resistance to yellowing
  • Outstanding thermal shock durability
  • Superior moisture resistance
Formulated Liquids 
  • Unique Chemistries
  • Custom formulations
  • Room temperature and frozen formulations
Busbar Coating, Switchgear Equipment and High Voltage Fuses 
  • Low voltage (600V) and medium voltage (up to 38kV) busbar coating
  • Economical formulations enable flexible, one-powder, low & medium voltage manufacturing solutions
  • UL-listed products with high RTI rating

Slot Insulation of Motor Iron Armatures and Stators 
  • Class H & Class F-rated epoxy coating powders
  • Superior edge coverage and dielectric strength
  • High productivity and long shelf-life stability
Resistors, Capacitors, Varistors and Passive Electronics 
  • Epoxy coating for passive components including resistors, varistors and capacitor
  • High temperature stable and excellent thermal cycling materials for ceramic capacitors
  • Fast-cure and low-temperature pickup materials for film-wrap capacitors
Toroids, Magnetic and Powder Cores 
  • Low moisture absorbing materials for stable inductance values
  • UL-listed products
  • Spray coatable and electrolytic sprayable coating powders
Epoxy Binder Resin for Pot Cores 
  • Excellent green strength to move parts before curing
  • Optimized particle size for optimum compression between ferrite alloy and epoxy resin
  • Low shrinkage to provide minimal magnetic interference
Aluminum Housed Resistors 
  • Maximizes pulse handling capability
  • The aluminum housing provides for superior heat conduction
  • Resistance to very tough environmental conditions.
Automotive Sensors & Stators 
  • Parts are often made of copper and nylon
  • Requires >1000 thermal cycles from -40°C to 195°C
  • Are regularly in contact with typical automotive fluids
Solenoid Valves 
  • Strong and tough with excellent thermal cycle / thermal shock performance
  • Excellent high temperature stability
  • Excellent color stability at operating temperatures
High Current Thermal Fuse 
  • Strength after Thermally conductive > 2.7W/mK
  • Tg must be higher than 135°C
  • CTE must be less than 20 ppm
Large Bushing and High Voltage Applications 
  • Epoxy Molding Compounds must have good high temperature stability
  • They must maintains color stability at high operating temperatures
  • SolEpoxy materials are proven compounds and have been used to make millions of bushings, and in some cases, requiring up to 5 kgs of material for a single mold shot
Surface Mount Capacitors 
  • Fast cure for high throughput
  • New materials are developed without halogens
  • CTE should be between 20-22ppm
Data transmission sensor 
  • High adhesion to NiPdAu and Ag lead frames
  • High transmission of wavelengths between 400-1050nm
  • Low moisture absorption for high MSL performance
LED SMT Liquid 
  • High-productivity molding compound capable of transfer molding
  • High glass transition temperature, able to withstand solder reflow temperatures
  • Low moisture absorption – alleviates pressure-induced stresses
Fiber Optic Products 
  • High adhesion to NiPdAu and Ag lead frames
  • High transmission of wavelengths between 400-1050nm
  • Low moisture absorption for high MSL performance
General Lighting Applications 
  • SolEpoxy holds two patents on phosphor-mixing clear mold compound
  • Mix phosphor for color-binning
  • SolEpoxy can handle proprietary phosphors
DK50 Electrostatically sprayable, thin film, epoxy coating powder for motor housings and low voltage busbars 
  • Low Voltage (up to 600V)
  • Electrostatically Sprayable
  • Can be applied as thin as 2mil (50um)
DK15-0907 Red Low and Medium Voltage Busbar Coating Powder 
  • Low (600V) and Medium Voltage busbars (up to 38kV)
  • "One Powder Solution" for low and medium voltage busbars
  • Red coating builds in excess of 200 mils (5 mm)
DK15-0606 Tan Low and Medium Voltage Busbar Coating Powder 
  • Low (600V) and Medium Voltage busbars (up to 38kV)
  • "One Powder Solution" for low and medium voltage busbars
  • Tan coating builds in excess of 200 mils (5 mm)
DK19 Industry standard epoxy coating powder for medium voltage (600V–38kV) busbars and switchgear 
  • Medium Voltage busbars (up to 38kV)
  • Uniform coating in excess of 5mm
  • Best-in-class arc resistance for better protection
DK15-0463 Black Humidity-Resistant Powder for Outdoor Low Voltage Busbars 
  • Low voltage busbars (up to 600V)
  • Excellent moisture resistance, even in high temperature and corrosive conditions
  • Excellent bed life—so important for large busbar coating operations
DK7-20H provides Class H performance while setting a new standard for productivity 
SolEpoxy™ DK7-20H is our new Class-H motor iron coating powder, providing excellent thermal resistance while setting a new standard in productivity and affordability.
DK15EG-05 flex fuel resistant epoxy powder coating designed for electric motor armature and stator insulation in automotive applications. 
DK15EG-05 flex fuel resistant epoxy powder coating designed for electric motor armature and stator insulation in automotive applications.

SolEpoxy™ DK15EG-05 works extremely well for both AC and DC electric motors, including those used for in-tank fuel pumps.
DK7-0953M is the industry standard for the insulation of electric motor armatures and stators 
DK7-0953M is the industry standard for the insulation of electric motor armatures and stators. DK7-0953M works extremely well for both AC and DC electric motors. This includes armatures and stators for fractional horsepower motors and higher.
DK18-05 Class 2 & 3 capable epoxy coating powder for ceramic capacitors /varistors and tantalum capacitors 
DK18-05 is a medium-performance, epoxy coating powder developed for Class 2 & 3 ceramic capacitors /varistors and tantalum capacitors.
DK18-0955 is best price-to-performance epoxy coating powder for Class 3 ceramic and film wrap capacitors 
DK18-0955 offers the best price-to-performance for class 3 ceramic and film wrap capacitors. DK18-0955 has excellent pickup and curing at temperatures as low as 110°C, making it excellent also for other temperature sensitive devices.
DK18-2100 Class 1 capable epoxy coating powder for automotive power ceramic capacitors and varistors 
DK18-2100 is a high-performance epoxy coating powder developed for Class 1 power capacitors and varistors, which are physically large high power and high voltage devices. On internal tests, DK18-2100 has passed the AEC-Q200 automotive stress test for thermal cycles, meaning that it has endured over 1000 cycles from -55°C to +125°C without a single crack.
Team SolEpoxy rises to the Corporate Challenge 
Team SolEpoxy rallied to compete in the sixth annual Southern Tier Corporate Challenge Run/Walk and to set a new benchmark in the Olean Food Pantry Corporate Challenge for giving.