Busbar Coating, Switchgear Equipment and High Voltage Fuses 
  • Low voltage (600V) and medium voltage (up to 38kV) busbar coating
  • Economical formulations enable flexible, one-powder, low & medium voltage manufacturing solutions
  • UL-listed products with high RTI rating

Slot Insulation of Motor Iron Armatures and Stators 
  • Class F-rated epoxy coating powders
  • Superior edge coverage and dielectric strength
  • High productivity and long shelf-life stability
Toroids, Magnetic and Powder Cores 
  • Low moisture absorbing materials for stable inductance values
  • UL-listed products
  • Spray coatable and electrolytic sprayable coating powders
Aluminum Housed Resistors 
  • Maximizes pulse handling capability
  • The aluminum housing provides for superior heat conduction
  • Resistance to very tough environmental conditions.
Automotive Sensors & Stators 
  • Parts are often made of copper and nylon
  • Requires >1000 thermal cycles from -40C to 195C
  • Are regularly in contact with typical automotive fluids
Solenoid Valves 
  • Strong and tough with excellent thermal cycle / thermal shock performance
  • Excellent high temperature stability
  • Excellent color stability at operating temperatures
High Current Thermal Fuse 
  • Strength after Thermally conductive > 2.7W/mK
  • Tg must be higher than 135C
  • CTE must be less than 20 ppm
Large Bushing and High Voltage Applications 
  • Epoxy Molding Compounds must have good high temperature stability
  • They must maintains color stability at high operating temperatures
  • SolEpoxy materials are proven compounds and have been used to make millions of bushings, and in some cases, requiring up to 5 kgs of material for a single mold shot
Surface Mount Capacitors 
  • Fast cure for high throughput
  • New materials are developed without halogens
  • CTE should be between 20-22ppm
System in Package Encapsulation 
  • Thermal conductivity: ≥ 2.5 W/m∙K
  • Glass Transition Temperature (Tg) must be higher than 135C
  • CTE must be lower than 20ppm/C
Data transmission sensor 
  • High adhesion to NiPdAu and Ag lead frames
  • High transmission of wavelengths between 400-1050nm
  • Low moisture absorption for high MSL performance
LED SMT Liquid 
  • High-productivity molding compound capable of transfer molding
  • High glass transition temperature, able to withstand solder reflow temperatures
  • Low moisture absorption alleviates pressure-induced stresses
Fiber Optic Products 
  • High adhesion to NiPdAu and Ag lead frames
  • High transmission of wavelengths between 400-1050nm
  • Low moisture absorption for high MSL performance
General Lighting Applications 
  • SolEpoxy holds two patents on phosphor-mixing clear mold compound
  • Mix phosphor for color-binning
  • SolEpoxy can handle proprietary phosphors
DK50 Electrostatically sprayable, thin film, epoxy coating powder for motor housings and low voltage busbars 
  • Low Voltage (up to 600V)
  • Electrostatically Sprayable
  • Can be applied as thin as 2mil (50um)